| Model |
APOE-48V |
| Input Power Requirements |
AC Input Voltage: 90 – 264Vac
AC Frequency: 47 – 63 HZ
AC Input Current:2A at 100Vac, 1A at 240Vac, (-48Vdc) |
| Power over LAN output |
Pin Assignments and Polarity: (＋) 4/5 (－) 7/8 |
| Output Voltage |
Aggregate Power: 50W (48Vdc +/- 2V) |
| Efficiency |
80% Typ. (At Full Load) |
| Output Current |
0 – 1A |
| Tolerance |
±5% (Combination Of Line, Load Regulation And Initial Set) |
| Ripple&Noise |
20MHz BW：2% Max. |
| Protection Type |
OVP ：Clamp By Zener Diode
Short Circuit ：Without Damage Occur For Short Circuit
OCP：TYP. 1.2A |
| Delectric withstand |
P – S 1500 VAC . |
| Insulation resistance |
P – S MORE THAN 100Mohm AT 500Vdc. |
| Operating Temperature |
32° to 104° F (0° to 40° C) |
| Operating Humidity |
Maximum 90% Non-condensing |
| Storage Temperature |
-13° to 185° F (-25° to 85° C) |
| Storage Humidity |
Maximum 95%, Non-condensing |
| Operating Altitude |
-1000 to 10,000 ft. (-304.8 to 3048 m) |
| System Indicator: |
AC Power (Green)
Power Active (Red) 0.05 A＜Io＜0.8 A
Over Current Protection (Red, Flash) Io＞1.0 A |
| Safety Approval |
UL 1950/ CSA A22.2 No. 950/ EN 60950/CB |
| Dimensions |
(H) 3.8 cm × (W) 10.4cm × (D) 13.8 cm |
| weight |
0.61Kg |
